Dock. Drive. Discover.

The QLK-150 wheelchair docking system is the next step in independent wheelchair securement (also known as powered lockdowns or tie-downs). It is the perfect solution for those looking to drive their own vehicle or want to quickly secure their own wheelchair using a single point system.

Along with the QLK-150 wheelchair docking system comes our dedication for staying up to date with current wheelchairs. Two of the most common wheelchairs used within the NHS are the Salsa M and the Salsa R Sunrise wheelchairs, Salsa M1 & M2 and Salsa R1 & R2.

Q’Straint has designed brackets to fit these 2 wheelchairs and successfully dynamically tested them with the QLK-150. The testing has been approved by Sunrise Medical. These brackets are available directly from Q’straint

QLK-150 Image 1

QLK-150, shown here with 1.5
  • QLK-150 Thumb 1
  • QLK-150 Thumb 2
  • QLK-150 Thumb 3
  • QLK-150 Thumb 4

Vehicle Applications:
Mini Van , WAVs

  • Mini Van
  • WAVs

Features and Benefits

Extensive Crash Testing

First and only system tested to higher WC/19 wheelchair loads; and also the only system tested Forward, Rearward and Sideways

Slim & Flexible Dash Control

Compact design has a much larger touch area and features imbedded LED indicators showing system statusFeature Image

Flush Surface

Eliminates "snags" and gives users an immediate 3/16" (5mm) of additional bolt clearance

Tapered Channel

Helps smoothly guide users into placeFeature Image

Reduced Footprint

Reduces castor interference with shortened design front to back (over the QLK-100) by 1.5" (38mm)


Newly designed Micro-processor controllerFeature Image

Sleep Function

When user exits docking base, system draws 76.5 micro amps (0.0000765 Amps): About 5 times less than other docking systems

Low Current Draw

Solenoid release draws between 4.2 – 9.1 amps (versus 18 Amps)

Reduced Electrical Components

New design only requires a single micro-switch and eliminates thermal switch for improved electrical reliability

Plug & Play Serviceability

Solenoid and limit switch feature quick connectors for faster maintenance and easier servicingFeature Image

Screw-Terminal Connectors

Connectors are easily removed for faster wire routing, and eliminates additional crimping and soldering

Removable Cover

Faster servicing and maintenanceFeature Image

Over-Torque Protection

Prevents “locking up” if internal hardware is over-torqued

Heat Treatment

All components except for base mounts are treated to increase strength, and reduce entry channel warping

Eco-Friendly Steel Coating

Our high grade steel features more eco-friendly coating, to prevent corrosion and reduce the impact on the environment

Lowest/Highest Clearance

Optional base mounts allow for the docking system to be mounted from 1.5” (38mm) to 4” (100mm)

1.5 Optional Floor Mount

Allows previously un-dockable lower ground clearance wheelchairs such as the Jazzy Select 6 and Ultra Elite to be easily secured

Advanced Stabilizer

Required for the driver’s position, it improves stability in moving vehicles. Easily attaches to the QLK-150 cover

  • Warranty – 3 years with completed warranty (click here for warranty registration)
  • Tested – Crash tested in forward, rearward and sideways facing directions
  • Meets or exceeds the following standards and regulations:
  • SAE J2249*
  • ISO 10542*
* Independent testing documentation available upon request.
  • Hardware

  • QC04057


    3/16" (5mm) Base Riser (shim) for QLK-150.

  • QS99027


    Stabilizer mounts directly onto the QLK-150 base and is adjustable forwards and backwards. Eliminates use of the common V-bracket and reduces additional vehicle modifications and install time. Installers will need to find a wheelchair mount location to install supplied counter-sunk 5/16” (8mm) bolt upwards.

  • Accessories

  • Q04F0013


    Manual Cable Release.

  • QS99020


    1.5" Base Mount kit for QLK-150 docking system. Shown with QLK-150 system (sold separately).

  • QS99021


    2" Base Mount for QLK-150 docking system. Shown with QLK-150 system (sold separately).

  • QS99022


    2.5" Base Mount for QLK-150 docking system. Shown with QLK-150 system (sold separately).

  • QS99023


    3" Base Mount for QLK-150 docking system. Shown with QLK-150 system (sold separately).

  • QS99024


    3.5" Base Mount for QLK-150 docking system. Shown with QLK-150 system (sold separately).

  • QS99007


    Flexible Dash Control (without screw-down terminal) QLK-150 system. Please refer to part number QS99007 for dash control assembly.

  • Docking Systems

  • Q04S150


    QLK-150 Personal Docking System with base mount.

  • Q04S153


    QLK-150 Personal Docking System without base mount.

Did You Register for our Annual Training Seminar? Learn more.